JIS 1168 EYE BOLT

JIS 1168 EYE BOLT
1. Please select the appropriate rotating rings as required. Do not exceed the rated load. The rotating rings are marked with rated load. 2. Tap the screw hole on the workpiece to make the lifting ring bolt installed vertically on the workpiece surface. The threaded hole should be drilled and...
Product Details

1.Please select the appropriate rotating rings as required. Do not exceed the rated load. The rotating rings are marked with rated load.

2.Tap the screw hole on the workpiece to make the lifting ring bolt installed vertically on the workpiece surface.The threaded hole should be drilled and sunk, so as to prevent the top grain from expanding when the hoisting ring is torsional.

3.The workpiece surface must be smooth, so that the lifting ring washer is in full contact with the workpiece surface, without any clearance in the middle.

4.Do not add padding between ring washer and workpiece surface;

5.After installation, the side of the hanging ring u-bolt shall not touch the suspended objects or other objects.

6.When hoisting, apply the load at a constant speed, gradually increase the force, do not apply the impact load and vibration load;

7. When rotating the hanger ring, the bolt of the hanger ring may gradually loosen, and the torque must be adjusted again.The customer shall check and tighten the bolts to the recommended torque regularly.

8.Special bolts and nuts must be used for rotating the rings.

9.Rotating rings are not suitable for high-speed rotation at full load.

14.jpg




Hot Tags: jis 1168 eye bolt, suppliers, buy, for sale
Feedback