G411 Standard Light Duty Thimble Hdg or Eg

G411 Standard Light Duty Thimble Hdg or Eg
*Standard Wire Rope light duty Thimbles meets the preformance requirements of Federal Specification FF-T_276b,Type II *The standard G411 thimble is for light duty application and loading conditions . *Both of electro galvanized and hot dip galvanized are available *Thimble Quality demand...
Product Details

*Standard Wire Rope  light duty Thimbles meets the preformance requirements of Federal Specification FF-T_276b,Type II

*The standard  G411 thimble is for light duty application and loading conditions .

*Both of electro galvanized and hot dip galvanized are available for light duty thimble

*The standard light duty thimble Quality demand :Thimble should be checked by inspector before shipping .The thimble must be smooth ,crack ,flaw and surface rough are not acceptable ,the top end of the thimble should be cut to half of the deep of groove .Sizes should be stamped on the thimble.

  67_副本.jpg67-1.jpg

67-2.jpg

Feedback